Scopus-CACRE 2019 : 2019 4th International Conference on Automation, Control and Robotics Engineering (CACRE 2019)
Call For Papers
Call for Papers
2019 4th International Conference on Automation, Control and Robotics Engineering (CACRE 2019)
19-21, July, 2019./Shenzhen , China
2019 4th International Conference on Automation, Control and Robotics Engineering (CACRE 2019), which is in conjunction with the 2019 4th International Conference on Artificial Intelligence and Robotics (ICAIR 2019), co-organized by Georgia Institute of Technology and Hong Kong Society of Mechanical Engineers(HKSME), sponsored by Sichuan University, Hong Kong University of Science and Technology. The conference will be held at Georgia Institute of Technology, Shenzhen Campus, China from July 19 to 21, 2019.
CACRE has been held for three years since 2016, which attracted scholars and students from all over the world. The CACRE 2019 Conference will provide a wonderful forum for you to refresh your knowledge base and explore the innovations in Automation, Control and Robotics Engineering. The Conference will strive to offer plenty of networking opportunities, providing you with the opportunity to meet and interact with th leading scientists, engineers and researchers, friends and colleagues as well as sponsors and exhibitors.
1.All the registered and presented papers will be published in IOP Conference Series: Materials Science and Engineering(ISSN: 1757-899X) , which will be indexed by EI Compendex, Scopus, Thomson Reuters (WoS), Inspec, and other indexing organizations.
2.Selected papers with extension can be recommended to publish in The Cyber-Physical Systems (ISSN: 2333-5785).
3.Selected papers with extension can be recommended to be published in Robotics (ISSN 2218-6581), which can be indexed by Emerging Sources Citation Index (ESCI - Web of Science) , Scopus (from Vol. 1), nspec (IET) and DBLP Computer Science Bibliography.
#CACRE 2018 was published in IOP Conference Series: Materials Science and Engineering and indexed by Ei Compendex!
1. Prof. Dan Zhang, York University, Canada
Dr. Zhang is a Fellow of the Canadian Academy of Engineering (CAE), a Fellow of the Engineering Institute of Canada (EIC), a Fellow of American Society of Mechanical Engineers (ASME), and a Fellow of Canadian Society for Mechanical Engineering (CSME), a Senior Member IEEE, and a Senior Member of SME.Dr. Dan Zhang is a Kaneff Professor and Tier 1 York Research Chair in Advanced Robotics and Mechatronics at York University.Dr. Zhang's research interests include robotics and mechatronics; high performance parallel robotic machine development; sustainable/green manufacturing systems; rehabilitation robot and rescue robot.
2. Prof. Seth Hutchinson, Georgia Institute of Technology, USA
President-Elect, 2018-present of IEEE Robotics and Automation Society，Associate Vice President for Conference Technical Programs，IEEE Periodicals Review and Advisory Committee (PRAC).Professor and KUKA Chair for Robotics, School of Interactive Computing ,Executive Director, Institute for Robotics and Intelligent Machines. Robotics: Vision-based control, motion planning, planning under uncertainty, pursuit-evasion, localization and mapping, locomotion, bio-inspired robotics.
3. Prof. Yiming Rong, South University of Science and Technology of China, China
Fellow member of American Society of Mechanical Engineers (ASME), Senior member of Chinese Society of Mechanical Engineering (CSME), Member of Society of Manufacturing Engineers (SME), Member of American Society of Metals (ASM) and Heat Treatment Society (HTS), Member of American Society of Engineering Education (ASEE).
4. Prof. Michael Y. Wang, Hong Kong University of Science and Technology, HK
Fellow of American Society of Mechanical Engineers (ASME), Fellow of Hong Kong Institution Of Engineers (HKIE), Fellow of Institute of Electrical and Electronics Engineers (IEEE).He is the current Editor-in-Chief of IEEE Trans. on Automation Science and Engineering, and served as an Associate Editor of IEEE Trans. on Robotics and Automation and ASME Journal of Manufacturing Science and Engineering.
5. Prof. Feng Gao, Shanghai Jiaotong University, China
Director of the state key laboratory of Mechanical System and Vibration, Director of institute of design and control engineering for heavy equipment.
6. Prof. Songyi Dian,Sichuan University, China
Senior member of Chinese Association of Automation, Senior member of China Instrument and Control Society and Chinese Society of Micro-Nano Technology, Executive Director of Sichuan Association of Automation and Instrument & Control.
●Topics(for more topics: http://www.cacre.org/cfp.html)
Robotics Science and Engineering
Control Science and Engineering
Automation Science and Engineering
Vision Science and Engineering
Mobile sensor networks
Submission System: https://cmt3.research.microsoft.com/CACRE2019
●Call for participants
1,Presenter:If you are interested in giving presentation on conference, without publishing your paper in the proceeding, you need to submit the abstract and title of your presentation to us:email@example.com
2,Listener: If you are interested in attending the conference to participant this gathering on the field of Automation, Control and Robotics, you are welcome to join us and share your ideas!
3,Reviewer:Experts in the area of Automation, Control and Robotics, are welcome to join the conference as reviewer. Send your CV to: firstname.lastname@example.org
Tel:+852-30506862( Hong Kong)